供应TNS-EZ-10金属线材扭转试验机

http://www.glmgs.com/prodxx.asp?id=1100武汉格莱莫检测设备有限公司 电话：13545068882；027-86619889传真：027-86619889 网址：www.glmgs.com一、TNS-EZ-10金属线材扭转试验机 产品简介该产品主要用于测定直径为Ф3-Ф10mm的金属线材钢丝绳等在单向双向扭转中承受塑性变形的能力，试验过程中可以显示线材的表面缺陷。非常适合生产线材单位的进货检验。该扭转试验机有两种旋转速度30、60转/分，通过开关调整。可夹持线材长度500-300mm，轴向加力采用10:1杠杆加重机动加力，到位自动启动旋转电机试验，试件断裂后自动停机。试验圈数由4位LED数码管显示，很大显示为999.9圈，试件断裂后，试验圈数值自动封锁。二、TNS-EZ-10金属线材扭转试验机 技术指标★试验直径范围（mm）：Ф3-Ф10mm ★试验转速（转/分）： 30、60 ★可夹持线材长度（mm）： 300--500 ★很大显示扭转圈数：999.9，试件断裂后，试验圈数值自动保存 A, TNS-EZ-10 metal wire torsion testing machine productsThe products are mainly used for measuring diameter ofΦ 3-Φ 10mm metal wire of steel wire rope in one-way and two-way reverse under the plastic deformation ability, during the test can show the wire surface defects. Very suitable for the production of wire unit of the incoming inspection. The torsion test machine has two kinds of rotational speed of 30, 60 rpm, adjusted by the switch. Clamping wire length 500-300mm, axial force using 10:1 lever weighting motor power, automatic start rotation motor test, test piece fracture after the automatic shutdown. Test coil number consists of 4 LED digital tube display, maximum display for 999.9 laps, try after fracture, numerical automatic blocking test ring.In two, TNS-EZ-10 metal wire torsion testing machine technical parameters★test range in diameter ( mm ):Φ 3-Φ 10mm★test rotation speed ( RPM ): 30, 60★can clamp the wire length ( mm ): 300--500★maximum display torsion coil number: 999.9, try after fracture, numerical test ring automatically save